Dehydrating Breathers

MESSKO DB100-T-HT Dehydrating Breather for Transformer Tanks

MESSKO (Reinhausen/MR) DB100-T-HT silica gel dehydrating breather with oil seal, for transformer conservator tanks. Second-hand unit.

Share This Product :

A MESSKO® DB-series dehydrating breather (Reinhausen/MR, Germany), type DB100-T-HT, for oil-filled transformer tanks.

Why a transformer needs to breathe at all

As load and ambient temperature cycle, the oil in the conservator expands and contracts. The displaced volume has to go somewhere, so the transformer draws air in and pushes it out through the breather. Every intake carries atmospheric moisture toward the oil.

Water is the most damaging contaminant in a transformer’s insulation system. It lowers the dielectric strength of the oil, and it accelerates the hydrolysis of the cellulose paper that insulates the windings — and the paper, not the oil, is what determines when the transformer reaches end of life. Oil can be replaced. Paper cannot.

How the breather works

  • Incoming air passes through an oil seal cup that traps dust and provides the first stage of moisture removal
  • It then passes through a column of silica gel, which adsorbs water vapour before the air reaches the conservator
  • The gel is colour-indicating — it changes shade as it saturates, so its state can be read from the ground

The maintenance point everyone misses

Silica gel is a consumable. Once the crystals have changed colour through their full depth the breather has stopped working, and a saturated breather is functionally identical to no breather at all — while still looking perfectly intact on the plinth. Colour is checked at every inspection, and the oil seal cup is checked for level at the same time.

Condition: second-hand unit. Send the connection size, silica gel charge and mounting arrangement with your enquiry.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].