AVR/TAPCON

MR TAPCON 250 Voltage Regulating Relay

Reinhausen (MR) TAPCON 250 automatic voltage regulator for on-load tap changer control, with parallel transformer operation over CAN bus. Second-hand unit.

Share This Product :

The TAPCON® 250 is Reinhausen’s automatic voltage regulating relay — the controller that decides when a transformer’s on-load tap changer operates, and in which direction.

What it actually does

Left alone, a transformer delivers whatever voltage its ratio and loading produce. The TAPCON measures the busbar voltage, compares it against a set point with a defined bandwidth and time delay, and issues raise or lower commands to the tap changer motor drive. The bandwidth and delay are what stop the tap changer hunting — operating back and forth on every small fluctuation and consuming its contact life for no benefit.

Capability

  • Parallel operation of several transformers, with multiple TAPCON 250 units linked over CAN bus — essential where two or more transformers feed a common busbar, since uncoordinated tap changers will circulate reactive current between them
  • Line drop compensation, so voltage can be regulated at a remote point on the feeder rather than at the transformer terminals
  • Nominal 120 V AC, 45–65 Hz supply and voltage sensing input
  • Panel-mounted, with local display and control

Why parallel control matters

Two transformers on the same busbar with independently acting regulators will chase each other: one taps up, the other sees the change and taps down, and a substantial circulating current flows between them doing no useful work but heating both. Master-follower or circulating-current control over the CAN link is what prevents that.

Condition: this is a second-hand unit. Send your transformer and tap changer details and IndusGrove will confirm condition, functional test status and availability, or quote a current-production equivalent.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].