MV Switchgear Parts

Load Break Switch (Italy)

Load break switch (Italy) for medium-voltage distribution switching. Second-hand unit.

Share This Product :

A load break switch of Italian manufacture, for medium-voltage distribution switching duty.

Where a load break switch sits between an isolator and a breaker

The three devices are frequently confused, and the distinction is a safety matter:

  • An isolator (disconnector) provides a visible, verified open point. It must never be opened under load — it has no arc-quenching capability, and doing so produces a sustained arc.
  • A load break switch can make and break normal load current, and typically make onto a fault, but cannot interrupt fault current.
  • A circuit breaker can interrupt full prospective fault current.

The load break switch exists because most switching operations are routine load transfers, not fault clearance — and a switch is far cheaper, simpler and more compact than a breaker.

Where they are used

Ring main units, secondary distribution substations, transformer isolation with an upstream fuse for fault protection, and sectionalising points on distribution networks. In an RMU the two cable ways are typically load break switches while the transformer way carries a switch-fuse or a breaker.

What to specify

  • Rated voltage and rated normal current — commonly 630 A at 11 or 24 kV
  • Short-time withstand current and duration, which must match the network fault level
  • Making capacity, insulation medium, and whether an earthing switch is integrated
  • Operating mechanism and whether motorisation is required

Condition: second-hand unit. Send a photograph of the existing part with its dimensions and ratings, and IndusGrove will confirm compatibility and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].