Protection & Relays

Schneider Electric MiCOM P127 Protection Relay

Schneider Electric MiCOM P127 directional and non-directional overcurrent and earth fault relay. Second-hand unit.

Share This Product :

The MiCOM P127 provides directional overcurrent and earth fault protection alongside the non-directional functions of the lower P12x models.

Why direction matters

A non-directional relay knows only that current is too high. On a parallel feeder, a ring circuit or a network with embedded generation, fault current can arrive from either side of the relay — and a relay that cannot tell the difference will trip a healthy circuit alongside the faulted one.

Directional protection compares the fault current against a polarising voltage to establish which way the power is flowing, and only operates for faults in the intended direction. That allows two parallel circuits to be graded against each other, and allows a ring to be protected without tripping the whole ring for a single fault.

The requirement it brings

Direction needs a voltage reference, so the relay requires VT inputs. Retrofitting a directional relay into a panel that has only CTs means adding voltage transformers and their wiring — usually the larger part of the job. Confirm VTs exist before specifying.

For earth fault direction, the polarising quantity is typically residual voltage (open-delta VT) or neutral current, and which one is available shapes the setting approach.

Functions

  • Directional and non-directional phase overcurrent, multiple stages
  • Directional and non-directional earth fault, including sensitive settings
  • IEC and IEEE curves, thermal overload, breaker failure
  • Disturbance recording and communications

Condition: second-hand unit. Send the CT ratios, auxiliary supply voltage and required communication protocol with your enquiry, and IndusGrove will confirm the model suffix, condition and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].