Protection & Relays

Schneider Electric MiCOM P442 Protection Relay

Schneider Electric MiCOM P442 numerical distance protection relay for transmission lines. Second-hand unit.

Share This Product :

The MiCOM P442 is a numerical distance protection relay for transmission and sub-transmission lines, from the P44x range.

Distance protection in brief

The relay measures voltage and current and computes the impedance to the fault. Since impedance scales with distance along the line, the relay establishes whether the fault lies within the section it protects — without needing to be graded against every downstream device.

Zones are set as a proportion of line impedance: an instantaneous Zone 1 reaching around 80–85% of the line, a time-delayed Zone 2 covering the remainder plus a margin, and Zone 3 as remote backup. The deliberate Zone 1 underreach exists because overreaching into the adjacent line would trip a healthy circuit.

Teleprotection closes the gap

To clear in-line faults instantaneously at both ends, the relays exchange a permissive or blocking signal over a communication channel. The scheme type — PUTT, POTT, blocking — is a design decision driven by the channel available and its reliability.

Additional functions

  • Power swing blocking, essential to prevent tripping during system swings
  • Switch-onto-fault and stub protection
  • Autoreclose with check synchronism
  • Fault location, disturbance recording, backup overcurrent

Before ordering

Confirm CT and VT ratings, the communication and teleprotection interface, and the full model suffix. A distance relay is configured to a specific line and its settings are not portable.

Condition: second-hand unit. Send the CT and VT ratios, auxiliary supply voltage and required communication protocol with your enquiry, and IndusGrove will confirm the model suffix, condition and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].