Relay Test Set

Megger UK SCITS Secondary Current Injection Test Set

  • Test outputs to 100 A a.c., 240 V a.c.,240 V d.c.
  • Auxiliary output to 120 V a.c. for directional relays
  • Integral custom timer for testing IDMT relays or circuit breakers
  • Automatic protection against current or thermal overload

Share This Product :

  • Test outputs to 100 A a.c., 240 V a.c.,240 V d.c.
  • Auxiliary output to 120 V a.c. for directional relays
  • Integral custom timer for testing IDMT relays or circuit breakers
  • Automatic protection against current or thermal overload
The SCITS100 Secondary Current Injection Test Set has a maximum rating of 100 A/1,8 kVA and a built-in timer unit. The test set is constructed in a rugged metal case with large carrying handles for practical field operations. The SCITS100 will test instantaneous relays, IDMT relays, directional relays, moulded circuit breakers and metering. Current or voltage at each of the three main sets of a.c. terminals is completely variable by use of the main output control. The outputs from these terminals are:
  • 0 to 100 A a.c. or 0 to 24 V a.c.
  • 0 to 30 A a.c. or 0 to 80 V a.c.
  • 0 to 10 A a.c. or 0 to 240 V a.c.
The rms current output, flowing via the common terminal, is measured to a resolution of 10 mA. Also incorporated are a variable 0 to 240 V d.c. output and an independently controlled 0 to 120 V a.c. output to allow directional relays to be tested. APPLICATIONS Protective devices such as relays, overload coils and circuit breakers must be checked on installation and at regular intervals while in service to ensure that they are always ready to operate correctly if a fault should occur in the equipment that they are protecting. Routine current injection testing will quickly detect faulty or incorrectly adjusted protection devices. Also, it will possibly prevent serious damage to plant equipment and maybe injury to personnel

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].