Oil Test Set

Oil Test Set BAUR PG 0S

BAUR PG 0S insulating oil test set for dielectric breakdown voltage testing of transformer oil. Second-hand unit.

Share This Product :

A BAUR PG 0S oil test set, for measuring the dielectric breakdown voltage of transformer insulating oil.

What the measurement reveals

Oil is placed between two electrodes at a defined gap and the voltage raised until it breaks down. The result is a direct measure of the oil ability to insulate — and an indirect but sensitive indicator of what has contaminated it:

  • Water — even small quantities of dissolved or free water reduce breakdown voltage sharply. Water enters through a saturated breather, a failed gasket, or migrates out of the paper insulation as the transformer ages.
  • Particulate — cellulose fibres, metal particles and carbon from arcing align in the electric field and bridge the gap.

The sampling problem

Oil testing is unusually sensitive to how the sample was taken. A dirty vessel, a container not flushed with the oil being sampled, exposure to humid air, or oil drawn from a stagnant valve pocket rather than the main tank will all produce a low result on perfectly sound oil.

More failed oil tests are caused by poor sampling than by poor oil. The sequence — flush the valve, flush the vessel, fill without splashing, seal immediately, allow entrained air to settle before testing — matters as much as the instrument.

Standards

Electrode shape and gap are defined by the test method, and IEC 60156, ASTM D877 and ASTM D1816 each specify different vessels. Results between methods are not comparable. Confirm which vessel is supplied.

Condition: second-hand unit. Send your required test voltage and the equipment under test, and IndusGrove will confirm condition, accessories included and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].