HIPOTs (1KV-15KV)

Hi-Pot Kikusui Tos 5050 AC 5KV with stand Voltage Tester

Kikusui TOS5050 AC 5 kV withstanding voltage tester with stand, for electrical safety compliance testing. Second-hand unit.

Share This Product :

A Kikusui TOS5050 AC withstanding voltage tester, 5 kV, supplied with stand.

A different machine from a substation hi-pot

This is a production and compliance safety tester, not a field HV test set. The distinction matters when sourcing: both are called hi-pots, and they are built for entirely different work.

A substation test set proves cables and switchgear at high energy in a barriered outdoor area. A bench withstanding voltage tester proves that a manufactured product — an appliance, a power supply, a motor, a medical device — has adequate insulation between live parts and its accessible metalwork, as required by product safety standards such as the IEC 60950, IEC 62368 and IEC 60601 families.

Why current limit is the critical setting

These testers are used on every unit coming off a production line, often by an operator holding the product. Trip current must be set high enough to allow legitimate leakage — a Y-capacitor across the mains filter draws real current at 5 kV — but low enough to detect a genuine insulation defect and to keep the fault energy survivable.

Set too high and defective units pass. Set too low and good units fail, and the operator starts overriding the tester, which is worse than not testing.

Checks on a used unit

Verify output voltage accuracy and trip current calibration, and inspect the HV lead, probe and interlock. Kikusui testers are well regarded and long-lived; the accessories usually fail first.

Condition: second-hand unit. Send the standard you are testing to, the required test voltage and whether AC, DC or both are needed, and IndusGrove will confirm condition, accessories and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].