Cable Test Set

BAUR SHIRLA Sheath Test and Fault Location Device

  • Automatic evaluation
  • Measuring bridge with automatic zero balancing
  • High accuracy by accounting for different cable sections in terms of length, conductor cross-section, and material

Share This Product :

The Baur Shirla sheath test and fault location device is used for cable and cable sheath testing, and for the pre-location and pin-pointing of cable sheath faults and cable faults due to earth contact. The fault pre-location is based on the measuring bridge principle according to Murray and Glaser. The measuring bridge is dimensioned especially for power cables but also enables pre-location for control and lighting cables. Zero balance and evaluation take place automatically. The fault distance is shown in meters. Various cable sections can be entered, thus increasing the accuracy of the measurement. For fault pin-pointing, shirla generates a pulsed voltage, thereby permitting the use of the step voltage method. Using the “Step voltage” set of the protrac? pinpointing system, cable sheath and other faults due to earth contact can be located quickly and accurately.   Functions
  • Cable and cable sheath testing with DC voltage up to 10 kV
  • Fault pre-location using high-resolution resistance measuring bridge
  • Pre-location of cable sheath faults and faults due to earth contact with measuring bridge
  • Step voltage method for cable sheath fault pin-pointing
  Features Pre-location of cable sheath faults and faults due to earth contact
  • Measuring bridge with automatic zero balancing
  • Automatic evaluation
  • High accuracy by accounting for different cable sections in terms of length, conductor cross-section, and material
  Cable sheath fault pin-pointing
  • Pulsed voltage up to 10 kV
  • 4 pulse patterns are selectable
  • Adjustable switch-on delay and operating time
  General functions
  • Continuously adjustable voltage
  • Adjustable current and voltage limitation
  • Automatic measurement sequences and reporting
  • Automatic report export to USB stick
  • Integrated discharge unit
  • Connection for an external emergency off the unit in accordance with EN 50191

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].