Composite Insulators

Wishpower Composite Suspension Insulator (10 kV – 500 kV)

Wishpower silicone rubber composite suspension (long rod) insulators for overhead transmission and distribution lines from 10 kV to 500 kV. One-shot HTV silicone housing moulded onto an in-house pultruded FRP core rod, with SML classes and creepage distances configured to the pollution severity of the destination network.

Share This Product :

Wishpower Composite Suspension Insulator (10 kV – 500 kV)

The Wishpower composite suspension insulator — also referred to as a polymer long rod or silicone rubber line insulator — is the workhorse product of Wish Composite Insulator Co., Ltd. of Xi’an, China. It is used in suspension and tension (dead-end) strings on overhead transmission and distribution lines, replacing porcelain and toughened glass cap-and-pin strings at a fraction of the weight.

Construction

A pultruded fibreglass (FRP) core rod carries the mechanical load. A high temperature vulcanised (HTV) silicone rubber housing is moulded onto the rod in a single shot, eliminating the shed-to-shed and shed-to-sheath interfaces where moisture ingress typically begins in multi-piece designs. Forged steel or ductile iron end fittings are crimped to the rod under controlled compression and galvanised to ISO 1461. Wishpower manufactures its own FRP core rods, so rod diameter and resin system can be matched to the specified mechanical rating.

Typical Specification

  • System voltage: 10 kV, 11 kV, 22 kV, 33 kV, 36 kV, 66 kV, 110 kV, 132 kV, 220 kV, 330 kV, 500 kV
  • Specified mechanical load (SML): standard classes from 70 kN through 550 kN
  • Housing material: HTV silicone rubber (SiR), one-shot moulded
  • Core: pultruded boron-free / ECR-grade fibreglass rod
  • End fittings: ball & socket, tongue & clevis, or Y-clevis — hot dip galvanised
  • Shed profile: standard, alternating (anti-fog) or aerodynamic
  • Creepage: configured to IEC 60815 pollution severity class (light through very heavy)
  • Applicable standards: can be supplied against IEC 61109 and IEC 62217; ANSI/IEEE equivalents on request

Why Composite Instead of Porcelain or Glass

A composite suspension insulator weighs roughly 70–90% less than the porcelain string it replaces. That reduces tower head loading, allows manual installation without heavy lifting equipment, and cuts freight cost per kilometre of line — a material factor on export projects. The silicone housing is hydrophobic and transfers that hydrophobicity into surface contamination layers, which is why composite units substantially outperform ceramic in coastal salt-fog, desert dust, cement plant and refinery environments. Composite units are also shatter-resistant, removing the gunshot vandalism failure mode that affects glass discs on rural feeders.

Applications

  • Overhead transmission line suspension and tension strings
  • Distribution feeder dead-end and angle assemblies
  • Line uprating and reconductoring projects where tower loading is constrained
  • Coastal, desert and heavily polluted industrial corridors
  • Compact line designs requiring reduced insulator weight and length

Ordering Information

Specify system voltage, SML rating, required minimum creepage distance, pollution severity level, end fitting type and coupling size, and annual quantity. Wishpower offers OEM and ODM service including customer branding and non-standard shed profiles. Submit an enquiry through IndusGrove and the request is routed directly to the Wishpower export team.

OEM/ODM available. Minimum order quantity typically 100 pieces. Incoterms FOB, CIF, CFR, EXW. Payment T/T or L/C. Typical lead time approximately 30 days ex Shanghai, Ningbo or Qingdao.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].