Transformer Bushings

ZDVolt ZDTRIP Resin-Impregnated Paper Transformer Bushing (24 kV – 1100 kV)

Dry RIP condenser bushings from 24 kV to 1100 kV to IEC, or 25 kV to 765 kV to ANSI/IEEE, rated 400 A to 5,000 A. Oil free, non-flammable and leak proof, with the first 550 kV unit energised in 2019.

Share This Product :

ZDVolt ZDTRIP Resin-Impregnated Paper Transformer Bushing (24 kV – 1100 kV)

The ZDTRIP series replaces the oil in the condenser core with cured epoxy resin. Crepe paper and grading foils are wound, vacuum dried and resin impregnated, then cured into a solid void free body. The bushing that results has no oil to leak, nothing to burn, and no level to monitor.

Why Networks Are Converting to Dry Bushings

  • No oil, no leakage. Flange seepage is a chronic maintenance item across ageing OIP populations and an environmental liability near watercourses.
  • Non-flammable. Remove the oil and you remove the fuel — decisive for indoor, underground, tunnel and offshore installations.
  • Benign failure mode. A dry core does not generate the pressure rise that turns a bushing failure into a tank rupture and fire. Given that bushing failure is a leading cause of total transformer loss, this alone often justifies the specification.
  • Simpler logistics. Can be transported and stored horizontally without the handling restrictions oil filled units carry.

Ratings

  • IEC 60137 and GB/T 4109: 24 kV to 1100 kV, 630 A to 5,000 A
  • ANSI/IEEE C57.19.00-2023 and C57.19.01-2017: 25 kV to 765 kV, 400 A to 5,000 A
  • Housing: composite or porcelain
  • Related series: ZDTRIS resin-impregnated synthetic, 24 kV to 145 kV IEC and 25 kV to 138 kV ANSI/IEEE, where reduced moisture sensitivity in manufacture and service is required

Track Record

Around 10,000 RIP bushings shipped by end of 2025 — a smaller population than the OIP line, reflecting how recently the industry began converting at scale. The first 550 kV RIP bushing was energised in 2019, and the RIP line was launched in 2012.

Applications

  • Indoor, underground and tunnel substations where fire load must be minimised
  • Offshore platforms and other confined installations
  • Replacement of ageing OIP bushings on in-service transformers
  • Networks reducing lifetime maintenance and environmental exposure

Ordering Information

Specify rated voltage and current, governing standard, creepage, housing material, mounting arrangement and BCT requirements. For retrofit, state the make and model being replaced so mounting and turret dimensions can be matched. Submit the enquiry through IndusGrove.

Manufactured at Jurong, Jiangsu, China, with a North American office in Palo Alto, California. Certifications: ISO 9001, ISO 14001, ISO 45001, GOST, UL, and ISO/IEC 17025 accredited laboratories. Average lead time approximately five months. Custom designs and replacement bushings for existing transformers available.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].