Composite Insulators

ZDVolt BambuX Composite Post Insulator (up to 1000 kV)

Patented BambuX™ hollow composite station post insulators for AC systems to 1000 kV and DC applications, in single sections up to 6 m tall and 800 mm diameter. Built on continuous wound fibreglass pipe, at a cost comparable to high strength porcelain.

Share This Product :

ZDVolt BambuX Composite Post Insulator (up to 1000 kV)

Station post insulators support busbars, disconnectors and other substation apparatus. Traditionally they are porcelain, which is heavy, brittle and limited in the height achievable as a single piece. Composite alternatives have existed for years but carry their own failure modes. BambuX™ is ZDVolt’s patented answer — a hollow, segmented composite post built on a continuous wound fibreglass pipe.

The Problem It Addresses

Solid rod composite posts are prone to cracking. Foam or gas filled composite posts introduce different issues: internal condition cannot easily be monitored, and air leakage across the seal is a recurring concern. The BambuX™ design uses a continuous windings fibreglass pipe (CWFP) to produce the FRP insulating tube, which achieves higher strength than conventional filament winding, and its hollow segmented construction — the reason for the bamboo analogy — avoids both the cracking of solid rods and the monitoring and leakage problems of filled designs.

Specification

  • AC systems: up to 1000 kV, to IEC and ANSI/IEEE
  • DC systems: BambuX™ composite HVDC post available; at ±500 kV DC a single section achieves 12.5 kN cantilever load
  • 1000 kV AC: three sections give an SCL of 3,000 lb
  • 765 kV / 750 kV: two sections at the same SCL rating
  • Maximum single unit: up to 6 m height, 800 mm diameter
  • Standards: ANSI/IEEE C29 TR series, IEC 60273 and IEC 60168 C series

Porcelain Posts Also Available

ZDVolt produces porcelain station posts to C130 grade in single pieces up to 2 m tall and 800 mm diameter, using patented enhanced cold isostatic pressing. The company reports this dry forming process cuts production time from around 60 days by traditional wet process to about 10 days, at consistent strength and lower cost. RTV coating or semi-conductive glaze can be applied where pollution performance demands it.

The commercially relevant point is that BambuX™ composite posts are priced comparably to high strength porcelain, so the choice can be made on engineering grounds — weight, seismic performance, shatter resistance, pollution behaviour — rather than on budget.

Applications

  • Substation busbar support from distribution class to UHV
  • Disconnector, isolator and earthing switch support columns
  • HVDC converter station and DC switchyard apparatus support
  • Seismic zones, where composite weight and shatter resistance are decisive
  • Heavily polluted coastal, desert and industrial substations

Ordering Information

Specify system voltage and whether AC or DC, required cantilever load, height, mounting flange and bolt pattern, creepage requirement and pollution severity, and the governing standard. Around 20,000 BambuX™ post insulators had shipped by end of 2025. Submit the enquiry through IndusGrove.

Manufactured at Jurong, Jiangsu, China, with a North American office in Palo Alto, California. Certifications: ISO 9001, ISO 14001, ISO 45001, GOST, UL, and ISO/IEC 17025 accredited laboratories. Average lead time approximately five months. Custom designs and replacement bushings for existing transformers available.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].