Reclosers & Sectionalizers

G&W Electric Viper-HV 72.5kV Sub-Transmission Recloser

Solid-dielectric pole-top recloser for sub-transmission systems up to 72.5 kV, rated to 1,200/2,000 A continuous current and 31.5 kA interrupting current.

Share This Product :

G&W Electric Viper-HV Recloser

The Viper-HV combines vacuum reclosing, current transformers and voltage sensors in a pole-top, automation-ready package for fault isolation and restoration on overhead sub-transmission systems.

Key procurement characteristics

  • 72.5 kV maximum rated voltage
  • 1,200 A or 2,000 A continuous-current options
  • 31.5 kA symmetrical interrupting current for three seconds
  • 350 kV basic impulse level
  • Three current transformers and three internal voltage sensors
  • 10,000 mechanical operations
  • Operating range from -40 °C to +65 °C
  • Solid-dielectric insulation with vacuum interrupters; no oil or SF6 gas
  • IEC 62271-111 and ANSI/IEEE C37.60 recloser requirements
  • Multiple mounting and relay-control configurations

IndusGrove independent directory profile compiled from manufacturer-published technical information for procurement research. Brand names and product marks belong to their respective owners.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].