On-Load Tap Changers

Type CM2 Vacuum On-Load Tap Changer

Vacuum-interrupter version of the proven CM platform — switching arcs are contained in vacuum bottles, so contact wear and oil contamination fall sharply and maintenance intervals extend dramatically.

Share This Product :

Type CM2 combines the mechanical layout of the well-established CM tap changer with vacuum interrupter switching. Load transfer arcs burn inside sealed vacuum bottles rather than in oil, which changes the economics of tap changer ownership.

In a conventional oil OLTC, every switching operation erodes contacts and carbonises oil; a transformer on a heavily regulated feeder can reach its maintenance limit in a few years. With vacuum switching, contact erosion is an order of magnitude lower and the oil stays clean, so inspection intervals are typically measured in hundreds of thousands of operations rather than tens of thousands.

Where CM2 pays for itself

  • Transformers on networks with high renewable penetration, where voltage regulation cycles many times per day
  • Remote or offshore substations where a maintenance visit is expensive
  • Industrial loads — arc furnaces, rolling mills, electrolysis — with continuous tap activity

The higher purchase price is normally recovered on the first avoided maintenance outage. Huaming will provide switching-duty calculations against a specific load profile on request.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].