Dry Type Transformers

Cast Resin Dry-Type Transformer

Vacuum cast epoxy dry-type transformers for indoor installation where fire load, oil containment or environmental exposure rule out an oil-filled unit.

Share This Product :

Cast resin transformers exist to solve a building problem rather than an electrical one. Where a transformer has to sit inside an occupied building, in a basement, on an offshore platform, in a tunnel or above a water catchment, an oil-filled unit brings a fire load, a bund, a fire suppression requirement and a spill liability. A dry-type unit removes all four.

Construction

  • HV winding vacuum cast in epoxy resin with reinforcement, giving high mechanical and short-circuit strength
  • Foil or strip LV winding
  • Insulation class F or H; typical ratings to 35 kV, 30 MVA class
  • Enclosure to IP20 through IP54 as the installation requires
  • PT100 winding sensors with a temperature control relay and forced-air fan option

Choosing honestly between dry and oil

Dry-type is not simply the better product. It costs more, has higher losses and greater audible noise than an equivalent oil unit, and it is more sensitive to a dusty or condensing environment unless properly enclosed. Where an oil transformer can be located outdoors on a plinth with a bund, that is usually the cheaper and more efficient answer. Specify dry-type when the installation genuinely demands it — and then specify the climatic, environmental and fire class (E2, C2, F1) rather than just the words “dry type”.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].