Earth & Ground Resistance Testers

AEMC Model 6474 GroundFlex Tower Ground Resistance Testing Kit

Tower footing resistance measurement on energised transmission structures without disconnecting the overhead ground wire — flexible sensors clamp around each tower leg.

Share This Product :

The GroundFlex® Field Kit pairs the Model 6474 GroundFlex® adapter with the Model 6472 ground resistance tester to measure the footing resistance of transmission, cellular and wind towers without disconnecting or isolating the overhead ground wire. For a transmission utility, that removes the outage, the crew time and the safety exposure that conventional tower testing demands.

How it works

Flexible sensors are wrapped around each tower leg and measure the current flowing in that leg, so the instrument can resolve the resistance of towers with one to four legs while the structure remains energised and bonded to the rest of the line. Traditional ground parameters — Fall-of-Potential, soil resistivity, bonding and earth coupling — are measured by the same kit.

Field capability

  • Impedance analysis across 41 Hz to 5 kHz, including lightning strike analysis at selected frequencies
  • Assessment of overhead ground conductor quality
  • Rejection of interference voltages up to 60 V peak
  • Automatic calculation of ground coupling coefficient and resistivity
  • Leakage current and stray voltage measurement
  • 512 complete measurements in internal memory, downloadable to DataView®
  • Battery, AC or 12 V DC operation, including while charging

AEMC reports that IEEE Std 81-2012 references the GroundFlex® kit and tower testing process as a method for measuring ground resistivity, ground impedance and earth surface potentials. Supplied as Cat. #2136.03 with four 16 ft GroundFlex® sensors, extension leads on reels, BNC leads, calibration loop, C-clamps, a wheeled field case and a 12 VDC/120 VAC inverter for vehicle use.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].