SF6 Gas Handling Equipment

DILO SF6 Gas Analyser for Purity, Moisture and Decomposition Products

Measures SF6 purity, moisture content and SO2 decomposition products in one sequence, determining whether gas meets IEC 60480 for reuse.

Share This Product :

An SF6 analyser answers three questions in a single measurement sequence: how pure is the gas, how wet is it, and has it been arcing?

The three measurements

  • Purity (% SF6) — how much air or other gas has entered the compartment. Falling purity is direct evidence of a leak that is drawing in as well as losing gas.
  • Moisture (dew point) — water content, the parameter that most often takes gas out of specification. Moisture reduces dielectric withstand and, combined with decomposition products, forms corrosive acids.
  • SO₂ and decomposition products — the signature of internal arcing or partial discharge. SF6 is chemically inert until an arc breaks it down; finding decomposition by-products means something inside the enclosure is failing.

Why it is a compliance instrument, not just a diagnostic

Under IEC 60480, gas recovered from equipment may only be reused if it meets defined limits. Below them, gas must be reconditioned or sent for destruction — it cannot simply be pumped back in. Analysis is what turns that judgement into a documented measurement, which matters when F-gas reporting is audited.

New gas is specified to IEC 60376. Measuring against both standards is what separates a maintainable SF6 fleet from one accumulating undiagnosed faults.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].