Practical, engineer-written guides to specifying power sector equipment — what each product actually does, the parameters that decide a selection, and the mistakes that are expensive to discover on site. Each guide links through to current listings and manufacturers on IndusGrove.
Test and measurement
Three-Phase Power Quality Analyzers
Harmonics, dips, flicker and unbalance — and why the Class A versus Class S distinction under IEC 61000-4-30 decides whether your measurement can be used in a dispute with a utility.
Transformer Turns Ratio (TTR) Testers
The 0.5% acceptance rule, why every tap must be tested rather than just the service tap, and how to choose between single-phase and three-phase sets.
SF6 Gas Handling Equipment
Service carts, gas analysers, leak pointers and self-closing couplings. What IEC 60376 and IEC 60480 require, and where SF6 losses actually come from.
Transformer monitoring and protection
Transformer Temperature Monitoring
Why a few degrees of hot-spot temperature halves transformer life, how thermal image winding measurement works, and the three dimensions that decide whether a replacement gauge will actually fit.
Switchgear and distribution
Ring Main Units (RMU)
Ring versus radial topology, 2S+1T and other configurations, and the trade-off between SF6 and solid dielectric insulation as F-gas regulation tightens.
Prefabricated Substations
Why factory assembly moves a substation off the project critical path, enclosure material choices, and the ambient temperature error that quietly ages the transformer.
Lightning Protection, Earthing and Surge Arresters
Two different jobs and two different standards. Rolling sphere design to IEC 62305, surge arrester selection to IEC 60099-4, and why lead length can undo a good arrester.
Metering and current measurement
Multi-Circuit Energy Meters
Measuring many circuits from one device, split-core versus solid-core CT selection, and why sub-metering projects fail on CT installation rather than on the meter.
Rogowski Coils
Current measurement without an iron core: why they cannot saturate, why an open circuit is safe, flexible versus rigid versus split types, and the positioning errors that quietly corrupt readings.
Need something not covered here?
IndusGrove works across the power, electrical, renewable energy and industrial sectors. If you are specifying equipment that is not covered above, send the application and the constraints — voltage, rating, standards, site conditions — and we will help narrow it down and identify suitable manufacturers.
Browse all manufacturers and products, or use procurement services for sourcing support.