Surge Protection Devices (SPD)

Zotup ZotupLimiter L 13/40 Compact Type 1+2 Surge Protective Device

Share This Product :

The Zotup L 13/40 230 range is the compact end of the ZotupLimiter Type 1 + Type 2 family, for 230/400 V installations where the lightning threat is real but moderate — sub-distribution boards, small commercial buildings, telecom cabinets and street-side equipment.

The range is offered in one-, two-, three- and four-pole versions and in both plain (204 series) and remote-contact (214 series, suffix “t”) variants, so a specifier can carry one product family through a whole installation and only pay for signalling where it is monitored.

Technical data

TypeT1 + T2 combined
Nominal voltage Un230 V AC
SeriesL 13/40 230 ff (COD. 204 1xx) — without remote contact
Series (monitored)L 13/40 230 t ff (COD. 214 1xx) — with remote contact
Pole configurations1, 2, 3 and 4 pole
StandardIEC 61643-11 / EN IEC 61643-11
FormatDIN rail modular, plug-in replaceable cartridges

Specify with your enquiry

  • Number of poles and earthing system
  • Whether remote contact signalling is required at that board
  • Cable length from this board to the equipment being protected — over roughly 10 m a Type 3 device is normally added at the load
  • Ambient pollution degree and enclosure IP rating

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].