Safety Testers

Metrel MI 3116 PV Analyser XA – Solar PV Installation Tester

Combined photovoltaic and electrical installation tester: PV string I-V curve tracing, insulation and continuity on DC arrays, irradiance and temperature measurement, plus the full AC installation test set.

Share This Product :

Metrel MI 3116 PV Analyser XA

The MI 3116 PV Analyser XA is a combined photovoltaic and electrical installation tester, covering both the DC side of a solar array and the AC installation it connects into — in a single instrument, with a single set of records.

PV-side testing

  • I-V curve tracing on PV strings and modules
  • Measurement of open-circuit voltage (Voc), short-circuit current (Isc), maximum power point and fill factor
  • Insulation resistance testing on the DC array
  • Continuity of protective and equipotential bonding
  • Irradiance and module temperature measurement, allowing results to be corrected to STC
  • Comparison of measured performance against the module datasheet

AC-side testing

The instrument also carries the standard installation test set — insulation resistance, loop and line impedance, RCD testing, earth resistance and TRMS current — so inverter output circuits and the point of connection can be verified without a second instrument.

Why STC correction is the point

A raw I-V curve taken at 600 W/m² and 55 °C tells you very little on its own. By capturing irradiance and cell temperature at the moment of measurement, the MI 3116 translates field results to Standard Test Conditions, which is the only basis on which measured output can be compared against the module’s nameplate rating or against last year’s test. For commissioning acceptance and for performance-guarantee disputes, that correction is the whole argument.

Applications

Commissioning and acceptance testing of rooftop and utility-scale PV, periodic performance verification, fault-finding on underperforming strings, and O&M inspection of existing solar plant.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].