Safety Testers

Metrel MI 3144 Euro Z 800 V Loop & Line Impedance Tester

High-precision 4-wire loop and line impedance tester with 300 A test current, for accurate prospective short-circuit current determination on LV systems up to 800 V.

Share This Product :

Metrel MI 3144 Euro Z 800 V

The MI 3144 Euro Z 800 V is a high-precision 4-wire line and loop impedance tester using a high test current of up to 300 A, for systems operating up to 800 V.

Why high test current matters

Standard installation testers measure loop impedance with a low test current, then extrapolate. On installations with very low loop impedance — large industrial supplies, close-coupled transformers, heavy busbar systems — the measured value approaches the resolution limit of the instrument, and the resulting prospective short-circuit current figure carries a large uncertainty.

The MI 3144 drives a high test current through a 4-wire (Kelvin) connection, eliminating test lead resistance and producing a genuinely accurate impedance value. That matters because the prospective fault current derived from it is what determines whether the installed protective devices have adequate breaking capacity — an under-estimate is a safety finding, and an over-estimate leads to unnecessarily expensive switchgear.

Measuring functions

  • Line impedance (phase to phase, phase to neutral) with 4-wire connection
  • Loop impedance (phase to protective earth)
  • Prospective short-circuit current calculation
  • High-resolution measurement suited to low-impedance industrial systems
  • Operation on systems up to 800 V, covering 690 V industrial distribution

Applications

Industrial LV distribution verification, transformer secondary and main switchboard commissioning, protective device coordination checks, 690 V plant supplies, and any installation where accurate fault level determination is required for discrimination studies.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].