DIN-Rail & Panel Meters

SACI M1DL3-MID Single-Phase DIN-Rail Energy Meter (MID Certified)

MID-certified single-phase DIN-rail energy meter, 0.25–5 (100) A, with four-quadrant reactive energy, RS-485 Modbus RTU and EN 50470-3 / EN 62053-23 compliance for billing use.

Share This Product :

SACI M1DL3-MID Single-Phase Energy Meter

The M1DL3-MID is a single-phase DIN-rail meter with MID certification and RS-485 Modbus RTU communication, for energy measurement and monitoring of electrical installations. It measures active imported and exported energy (EP+, EP−), reactive energy in four quadrants, and the electrical parameters of single-phase systems.

What MID certification means for you

MID (Measuring Instruments Directive) approval is what makes a meter legally usable for billing a third party. An uncertified sub-meter can inform an internal cost allocation, but it cannot support an invoice to a tenant that would survive challenge. If the meter’s readings will appear on someone else’s bill, MID is not optional — and it is the single most common specification error in sub-metering projects.

Technical data

  • Rated voltage: 230 V AC, measuring range 230 V ±20 %
  • Nominal current: 0.25 – 5 (100) A · measuring range 0–100 % IMAX
  • Starting current: 20 mA
  • Frequency: 50 or 60 Hz · network type 1P2W
  • Own consumption: < 10 VA, < 1 W
  • Display: LCD, 5 digits + 2 decimals
  • Verification output: 1000 imp/kWh with verification LEDs
  • Communication: RS-485, Modbus RTU
  • Protection: IP51 · electromagnetic environment E2 · mechanical environment M1
  • Humidity: average relative humidity ≤ 75 %

Standards

EN 50470-1 · EN 50470-3 · EN 62053-23 · DIN 43864 · EN 61010

Applications

Tenant and apartment sub-billing, EV charge point energy accounting, landlord recharging, and Modbus integration into energy management platforms.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].