Earthing & Lightning Protection

Bolei Bronze and Brass Ground Clamps

Solid brass and bronze ground clamps with stainless steel screws, for rod-to-cable, rod-to-tape and pipe bonding connections. Manufactured to IEC/BS EN 62561-4 with a stated 50 year design life.

Share This Product :

Bolei Bronze and Brass Ground Clamps

The ground clamp is the joint between the earth electrode and the conductor that connects it to the installation. It is a small brass casting costing a couple of dollars, and it decides whether an earthing system that measured correctly at commissioning still works twenty years later.

Why the Joint Is Where Earthing Fails

Earthing systems rarely fail because the resistance target was wrong. They fail because the connections corrode. Bury dissimilar metals in wet soil and you have built a galvanic cell: the more anodic metal corrodes preferentially, and the connection that measured a fraction of an ohm at handover becomes effectively open circuit. Nobody notices, because earth systems are buried, unmonitored and almost never retested.

That is why the material specification on a clamp matters more than its price. Solid brass or bronze bodies with stainless steel screws keep the electrochemical potentials close enough that the joint survives. Plated steel does not, and the saving is measured in cents against a failure that is invisible until someone needs the earth to work.

Specification

  • Body material: solid brass, bronze, copper or aluminium alloy
  • Fasteners: stainless steel or brass screws
  • Type BJDLI range: pipe 1/2″–1″, rebar 3/8″–1″, ground rod 1/4″–1″
  • Standard: IEC/BS EN 62561-4
  • Design life: 50 years stated
  • Finish: natural, sand polished
  • Customisation: other sizes and materials to order; OEM branding available

Applications

  • Substation earth grids and electrode connections
  • Transmission and distribution structure earthing
  • Telecommunications sites and mast earthing
  • Railway, petrochemical and military installations
  • Data centres, computer rooms and intelligent building systems
  • Lightning protection down-conductor terminations

Ordering Information

State the conductor and electrode sizes to be joined, body material, fastener material, the governing standard, and quantities. Typical minimum order is 1,000 pieces per item, with trial quantities negotiable. Submit the enquiry through IndusGrove.

Manufactured to IEC/BS EN 62561-4 with a stated 50 year design life. ISO 9001 and ISO 14001 certified. Capacity up to 200,000 pieces per month across gravity casting, forging, machining, polishing and assembly lines. Typical MOQ 1,000 pieces per item. Incoterms FOB, CIF, EXW; payment L/C, T/T or D/P. Ports Ningbo and Shanghai. OEM and ODM available.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.