Buchholz Relay for Main Tank

Buchholz relay Make CEDASPE (ITALY) Model NO:EE3 MG 1 BSP

CEDASPE EE3-MG Buchholz relay with 1 inch BSP connection for oil-filled transformers. Second-hand unit.

Share This Product :

A CEDASPE EE3-MG Buchholz relay (Italy) with a 1 inch BSP threaded connection, for transformers fitted with a conservator.

Buchholz protection in one paragraph

Fitted in the pipe between tank and conservator, the relay catches gas rising from the tank. Slow gas accumulation from a developing fault raises an alarm; a violent oil surge from a high-energy fault, or a serious loss of oil, causes a trip. It is the only device that detects an internal transformer fault while it is still developing, rather than once it has become an electrical event.

Why it is worth wiring the alarm properly

A recurring failure in practice is a Buchholz alarm wired to an annunciator that nobody monitors, or to a contact never commissioned. The relay operates correctly, the gas accumulates, and the information reaches no one.

The alarm contact should reach a system where someone will act on it within days, and the site procedure should state what that action is — sample the gas, analyse it, and decide. An alarm with no defined response is not protection.

Before ordering a replacement

  • Thread standard — BSP, NPT and metric are not interchangeable, and the difference is not obvious by eye
  • Pipe nominal diameter and the face-to-face dimension
  • Oil flow response rating, specified by the transformer manufacturer against the tank and pipe geometry
  • Contact configuration and terminal box orientation

Condition: second-hand unit. Send a photograph of the existing relay and its type plate, plus the thread standard and pipe size, and IndusGrove will confirm compatibility and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].