Tan Delta & Dielectric Loss Testers

Chongqing Gold GDGS Automatic Tan Delta and Insulation Power Factor Tester

Integrated 10 kV tan delta and insulation power factor test set with built-in variable-frequency supply, step-up transformer and SF6 standard capacitor.

Share This Product :

The GDGS is an automatic transformer insulation power factor and tan delta tester built as a single integrated unit containing the dielectric loss bridge, a variable-frequency power supply, a step-up transformer and an SF6 high-stability standard capacitor. Because the high-voltage source is built in, the instrument can supply the test voltage itself rather than depending on a separate set.

Dielectric loss measurement detects both bulk moisture ingress and localised insulation defects in a transformer, and is used through the equipment life cycle — in manufacture, at installation, at handover and in preventive maintenance programmes. The variable-frequency design is what gives the instrument its interference rejection: by testing at frequencies offset from the power frequency, the measurement discriminates against induced 50 or 60 Hz noise, which is the main difficulty when testing energised substations.

Specifications published by the manufacturer: operating conditions minus 15 to 40 degrees C at below 80% relative humidity; anti-interference by frequency conversion; supply AC 220 V plus or minus 10%; high-voltage output 0.5 to 10 kV in 0.1 kV steps at 2% precision, maximum current 200 mA, capacity 2000 VA, with 12 kV available as a customisation; self-excited power output 0 to 50 V at 15 A at 45/55 Hz, 47.5/52.5 Hz, 55/65 Hz and 57.5/62.5 Hz with automatic double-frequency operation; resolution 0.001% for tan delta and 0.001 pF for capacitance; accuracy for tan delta plus or minus reading times 1.0% plus 0.040%, and for capacitance plus or minus reading times 1.0% plus 1.00 pF; tan delta measuring range unlimited, capacitance range 15 pF to 300 nF, with limits of 60 nF at 10 kV, 150 nF at 5 kV and 300 nF at 1 kV; CVT ratio range 10 to 10,000 at 0.1% accuracy with 0.01 resolution; dimensions 350 by 270 by 270 mm; memory 200 groups with USB storage; weight 28 kg.

Applications include power and distribution transformer insulation assessment, bushing tan delta testing, instrument transformer and CVT testing, and cable and rotating machine insulation diagnostics.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.