CT & PT Analyzers

Chongqing Gold GDVA-405 Automatic CT PT Analyzer

Automatic current and voltage transformer analyser to IEC 61869, IEC 60044 and ANSI C57.13, with 180 V / 5 A output and knee-point measurement to 60 kV.

Share This Product :

The GDVA-405 is an automatic CT and PT analyser for testing current transformers and inductive and capacitor voltage transformers. It calculates ratio error and phase angle error at both rated burden and working burden in a single test, and automatically evaluates results against the selected standard.

Supported standards are IEC 61869, IEC 60044-1 for current transformers, IEC 60044-2 for inductive voltage transformers, IEC 60044-5 for capacitor voltage transformers, IEC 60044-6 for protective current transformers with transient performance requirements, and ANSI C57.13 classes 45 and 30. Testing at working burden rather than only at rated burden matters in practice, because a protection CT loaded well below its rated burden behaves differently from the nameplate, and a metering CT installed with long secondary leads may not.

Specifications published by the manufacturer: power supply AC 220 V plus or minus 10% at 50/60 Hz, with AC 110 V, 120 V and 127 V available on request; voltage output 0.1 to 180 V AC; current output 0.001 to 5 A RMS; power output 500 VA; maximum knee-point voltage measurement 60 kV; current measurement 0 to 10 A with automatic ranging at 0.1, 0.4, 2 and 10 A and error better than 0.1% of reading plus 0.01% of full scale; voltage measurement 0 to 200 V with automatic ranging at 1, 10, 70 and 200 V and the same error class; turns ratio measurement 1 to 35,000, with error below 0.05% from 1 to 2000, below 0.1% from 2000 to 5000 and below 0.2% from 5000 to 35,000; phase measurement error 2 minutes with 0.01 minute resolution; winding resistance measurement 0 to 8 kilohms with automatic ranging at 2, 20, 80, 800 ohms and 8 kilohms, error below 0.2% of reading plus 0.02% of full scale and maximum resolution 0.1 milliohms.

Applications include factory acceptance and routine testing at instrument transformer manufacturers, substation commissioning, protection system verification and periodic utility maintenance.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.