Transformer Bushings

DHE A1 Epoxy Transformer Bushing (800 A – 6,500 A)

Cast epoxy low voltage transformer bushings from 800 A to 6,500 A in aluminium and copper, to ANSI, IEEE, IEC and CSA. Every bushing carries a unique traceability code and passes 100% leakage inspection, with a verified −40 °C to +130 °C range.

Share This Product :

DHE A1 Epoxy Transformer Bushing (800 A – 6,500 A)

The low voltage terminal of a distribution transformer carries the full secondary current — thousands of amperes at 400 V or similar. The bushing at that terminal has an easy electrical job and a hard thermal and mechanical one, and it is also the most common source of oil leaks on a distribution transformer.

Why Epoxy Displaced Porcelain at the LV Terminal

Cast epoxy resin is moulded as one piece around the conductor, so there is no porcelain-to-metal cement joint to fail. It will not chip or shatter in handling and transport, it tolerates thermal cycling without the differential expansion problems of a ceramic-metal assembly, and it can be moulded to complex terminal geometries that porcelain cannot. On pad-mounted and pole-mounted transformers built in volume, epoxy has become the default.

The Three Things DHE Puts Its Name To

  • 100% leakage inspection. Every bushing is tested, not a sample. Oil leakage at the LV bushing is the single commonest warranty claim on a distribution transformer, and it is expensive because the transformer is already in the field when it appears.
  • Unique traceability code on every epoxy bushing. If a batch problem does emerge, the affected units can be identified precisely rather than by conservative recall of everything shipped in a period. For an OEM supplying a utility framework, that difference is measured in hundreds of thousands of dollars.
  • −40 °C to +130 °C verified range. Climate tested rather than calculated, which matters for high-altitude, desert and cold-climate deployments where the epoxy formulation and the metal-to-resin interface are both being stressed.

Series and Ratings

  • 2A series — 3,150 A aluminium
  • 2B series — 4,300 A copper
  • 3B series — 2,200 to 4,515 A copper
  • 4B series — 4,515 A copper
  • 5B series — 5,400 A copper
  • 6B series — 6,500 A copper
  • 7B series — 2,200 to 3,010 A copper
  • ES1230 series — 800 to 2,000 A copper
  • ES5075 series — 1,600 A to 4,300 A in aluminium and copper

Applications

  • Pad-mounted distribution transformers
  • Pole-mounted distribution transformers
  • Wind and solar collector transformers, grid-tied and off-grid
  • EV charging station transformers
  • High-altitude and extreme climate installations

Ordering Information

Specify current rating and conductor material, voltage class, terminal and spade arrangement including hole pattern, mounting flange and gasket details, and the governing standard. Custom designs to your drawing are standard practice here. Submit the enquiry through IndusGrove.

Designed and tested to ANSI, IEEE, IEC and CSA standards. 100% leakage inspection on every bushing, unique traceability code per epoxy bushing, and a verified operating range of -40 degrees C to +130 degrees C. Long-term supplier to ABB and GE. Custom designs to customer drawings. Contact via IndusGrove with the transformer rating, current, terminal arrangement and mounting details.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.