Transformer Bushings

DHE A4 Porcelain Low Voltage Transformer Bushing

Porcelain low voltage transformer bushings in internally clamped and externally clamped constructions, for distribution transformer manufacturers who specify ceramic rather than cast resin.

Share This Product :

DHE A4 Porcelain Low Voltage Transformer Bushing

Despite the shift to cast epoxy, porcelain remains specified on a substantial share of distribution transformer builds — sometimes by utility standard, sometimes because the operator has decades of field data on it and no appetite to revalidate.

Internally Clamped or Externally Clamped

The distinction is how the porcelain is held against the transformer tank, and it determines the failure mode.

  • Internally clamped — the clamping force is applied through the centre conductor from inside. Cleaner external appearance and fewer exposed parts, but the porcelain sees the clamping load through the conductor assembly.
  • Externally clamped — a separate flange and clamping ring hold the porcelain from outside. The clamping load is carried independently of the conductor, which distributes stress on the ceramic differently and can be replaced without disturbing the conductor path.

Neither is universally better. What matters is that the gasket arrangement suits the clamping method and the tank flange, which is why these are usually built to the transformer maker’s drawing rather than picked from a catalogue.

Why the Gasket Matters More Than the Porcelain

Porcelain rarely fails electrically at low voltage. What fails is the seal. Thermal cycling, gasket compression set over years, and the different expansion rates of ceramic, metal and elastomer combine to open a path for oil. DHE applies 100% leakage inspection to every bushing, which is the only meaningful control at the point of manufacture.

Specification

  • Types: low voltage bushing, internally clamped, externally clamped
  • Housing: wet process glazed porcelain
  • Conductor: copper or aluminium to the rating required
  • Standards: ANSI, IEEE, IEC and CSA
  • Testing: 100% leakage inspection; complete type test programme
  • Customisation: built to customer drawings

Applications

  • Oil-immersed distribution transformers
  • Pole-mounted and pad-mounted units
  • Replacement bushings for existing transformer fleets
  • Utilities with a standing porcelain specification

Ordering Information

Supply the bushing drawing or the outgoing part number, and state clamping type, current rating, conductor material, creepage requirement, gasket specification and the governing standard. Submit the enquiry through IndusGrove.

Designed and tested to ANSI, IEEE, IEC and CSA standards. 100% leakage inspection on every bushing, unique traceability code per epoxy bushing, and a verified operating range of -40 degrees C to +130 degrees C. Long-term supplier to ABB and GE. Custom designs to customer drawings. Contact via IndusGrove with the transformer rating, current, terminal arrangement and mounting details.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.