SF6 Gas Handling Equipment

DILO SF6 Gas Mixing Unit

Prepares and fills defined SF6 / nitrogen gas mixtures to a set ratio, for equipment specified to run on mixed insulating gas rather than pure SF6.

Share This Product :

A mixing unit produces a defined mixture of SF6 with nitrogen (or another carrier gas) at a set ratio and fills it into the equipment.

Where mixtures are used

Two reasons dominate. First, cold climates: pure SF6 liquefies as temperature falls and pressure rises, so equipment installed where winter temperatures are severe is specified on an SF6/N₂ mixture that stays gaseous. Second, reduced SF6 inventory — a mixture cuts the mass of SF6 in the asset, which reduces both the leakage exposure and the reporting burden under F-gas regulation.

Why the ratio has to be right

Dielectric strength does not scale linearly with SF6 content, and the equipment’s rated withstand was type-tested at a specific mixture. Filling by rule of thumb produces gas that is either electrically weaker than the nameplate assumes or wastefully rich. A mixing unit sets and verifies the ratio rather than estimating it.

Specify the target mixture ratio, fill volume and pressure with your enquiry.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.