STATCOM

FGI 6.6 kV Indoor Liquid-Cooled High Voltage SVG (STATCOM)

Share This Product :

The FGI 6.6 kV indoor liquid-cooled SVG is an IGBT-based static var generator for 6–6.6 kV medium voltage networks. It responds to reactive power changes in under 5 ms, continuously injecting or absorbing reactive current to hold voltage, correct power factor and absorb the impact of rapidly changing loads such as arc furnaces, rolling mills, mine hoists and welding plant.

Unlike fixed or step-switched capacitor banks, an SVG regulates continuously and does not resonate with system harmonics or suffer the switching transients and contactor wear of a stepped bank. Liquid cooling allows the higher power density that makes an indoor installation practical where floor area is limited.

Control and operating modes

  • Constant reactive power, power factor, voltage control and negative-sequence compensation, switchable in real time
  • Negative-sequence current suppression and harmonic mitigation to the 13th order
  • Multi-chip DSP and FPGA control using instantaneous reactive power theory with FFT harmonic analysis
  • Multi-level protection with rapid fault response and early-warning monitoring

Technical parameters (FGI HV SVG platform)

  • Rated voltage: 6 kV ±10% to 35 kV ±10%
  • Input voltage: 0.9–1.1 pu; LVRT 0 pu for 150 ms, 0.2 pu for 625 ms
  • Frequency: 50/60 Hz, short-term fluctuation permitted
  • Output capacity: ±0.1 Mvar to ±200 Mvar
  • Starting power: ±0.005 Mvar
  • Compensation current resolution: 0.5 A
  • Response time: <5 ms (controller ≤1 ms, full power within 5 ms)
  • Overload capacity: >120% for 1 minute
  • Power loss: <0.8%; output THDi <3%
  • Control power: 380 V AC, 220 V AC / 220 V DC, dual supply
  • Regulation: continuous smooth capacitive and inductive adjustment
  • Communication: Ethernet, RS485, CAN, optical

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.