Surge Arresters

Fuerte Polymer Housed Surge Arrester (12 kV – 36 kV)

Gapless metal oxide surge arresters in silicone rubber housing for 12 kV to 36 kV distribution networks. Proven on weak island grids and high-altitude lines, with KEMA and CESI verification.

Share This Product :

Fuerte Polymer Housed Surge Arrester (12 kV – 36 kV)

A metal oxide surge arrester limits the overvoltage reaching transformers, switchgear and cable terminations during lightning strikes and switching events. The active element is a stack of zinc oxide varistors whose resistance collapses the instant an overvoltage arrives, diverting the surge to earth and clamping the residual voltage to a level the protected equipment can withstand. Because the design is gapless, response is immediate and there is no follow current to interrupt.

Where This Matters Most

Arresters earn their keep on networks that are electrically weak or lightning exposed. Fuerte has supplied overvoltage protection for the Greek island grids — systems with low short-circuit capacity, low inertia and high sensitivity to disturbance, where a transient that a strong mainland network would absorb can cause real damage. Similar duty applies across island and rural networks in Africa, South East Asia and the Caribbean.

Typical Specification

  • System voltage: 12 kV to 36 kV distribution class
  • Rated voltage (Ur): matched to system voltage and earthing arrangement
  • Nominal discharge current: 5 kA and 10 kA classes
  • Housing: silicone rubber, hydrophobic, UV and pollution resistant
  • Active element: gapless zinc oxide varistor stack
  • Pressure relief: fitted, with defined short circuit withstand
  • Mounting: line, bracket, cross arm or transformer tank; disconnector and surge counter optional
  • Standards: IEC 60099-4, IEEE C62.11, or buyer specification

Applications

  • Distribution transformer HV terminal protection
  • Pole-mounted and pad-mounted substations
  • Overhead line to underground cable transitions
  • Ring main units, reclosers and switchgear
  • Solar PV and wind collector systems
  • Weak island grids and lightning exposed rural feeders

Selection Notes

Getting the rating right matters more than the price. Specify system nominal voltage, the earthing arrangement (solidly earthed, resistance earthed or isolated neutral), maximum continuous operating voltage, the temporary overvoltage profile, required discharge class, pollution severity and altitude. An arrester rated too low will fail thermally in service; rated too high it will not protect the equipment it is there to protect. High-altitude coordination is available — Fuerte has supplied 15–36 kV sets for lines at 1,500 to 3,500 m in Colombia. Submit the enquiry through IndusGrove.

ISO 9001 certified by DEKRA Germany, with products independently verified by CESI Italy and KEMA Netherlands. More than 100 bespoke designs delivered to customer grid codes. OEM and ODM supported. Contact via IndusGrove with system voltage, rating, standard and annual quantity.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].