HIPOTs (15KV & Above)

Hi-Pot T & R 120 KV AC

T&R Test Set 120 kV AC hi-pot high voltage test set for cable and apparatus withstand testing. Second-hand unit.

Share This Product :

A T&R Test Set 120 kV AC hi-pot — a high voltage AC withstand test set for proving the dielectric strength of cables, switchgear and apparatus.

What a withstand test proves, and what it does not

A hi-pot test applies a voltage well above normal operating level for a defined period and confirms the insulation does not break down. It is a pass or fail test: the equipment either survives or it does not.

What it does not do is tell you how close to failure a passing sample was. A cable that passes today may be substantially degraded; the test simply establishes that it is not degraded enough to fail at that voltage. That is why withstand testing is complemented by diagnostic techniques — tan delta, partial discharge, insulation resistance trending — which measure condition rather than survival.

AC versus DC on cable

AC withstand testing stresses insulation in the same way service voltage does, which is why it is preferred for modern XLPE and EPR cable. DC testing of aged polymeric cable is now widely discouraged: it deposits space charge in the insulation that can precipitate failure after the test rather than during it.

DC remains appropriate for paper-insulated cable, sheath testing and much switchgear work. Confirm the test standard applicable to your asset before choosing.

Safety

A 120 kV set requires a properly barriered test area, interlocked access, a reliable earth and discharge sticks. Cable capacitance retains a dangerous charge after the supply is removed.

Condition: second-hand unit. Send the required test voltage, the equipment you are testing and whether AC or DC output is needed, and IndusGrove will confirm condition, accessories included and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].