De-Energized Tap Changers

WSL / WDL / WDG De-Energized Tap Changer (DETC)

Cage, drum and linear off-circuit tap changers fitted inside the transformer tank — the standard ±2×2.5% voltage adjustment on distribution and medium power transformers.

Share This Product :

Not every transformer needs on-load regulation. On distribution and medium power units the usual requirement is a modest, occasional voltage correction made with the transformer de-energised — typically ±2×2.5% — and that is what a de-energized tap changer (DETC, also called an off-circuit tap changer) provides at a fraction of the cost and complexity of an OLTC.

Huaming supplies the three standard mechanical families:

  • WSL / WDL cage type — in-tank construction with no separate oil compartment, the most common arrangement on oil-immersed distribution transformers
  • WDG drum type — often built as a combination of one single-phase and one two-phase unit
  • ZWC linear type — three single-phase units mechanically interconnected for linear regulation

The failure mode worth designing against is contact coking: a DETC that is never operated builds a resistive oxide film at the contact interface, which then generates heat and gas. Specifying a proven contact system, and exercising the tap changer through its full range at each maintenance visit, prevents a fault that commonly gets misdiagnosed as a winding problem.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].