Transformer Cores & Silicon Steel

Julong Low Noise Dry-Type Transformer Iron Core

Dry-type transformer cores cut by the full sequence method using Baosteel B30P105-LM low noise steel, achieving a 3 dB reduction in sound level — the decisive specification for transformers installed inside occupied buildings.

Share This Product :

Julong Low Noise Dry-Type Transformer Iron Core

Dry-type transformers sit inside buildings — hospital plant rooms, data centres, shopping centres, basements of high-rise offices. Unlike an outdoor oil-filled unit surrounded by a compound, they are often metres from occupied space, which makes audible noise a primary specification rather than an afterthought.

Where Transformer Noise Comes From

The hum is not mechanical vibration in the usual sense. It is magnetostriction — silicon steel physically changes dimension slightly as it magnetises and demagnetises, twice per cycle, so a 50 Hz transformer radiates a 100 Hz tone and its harmonics. Because it originates in the steel itself, it cannot be engineered out downstream. It has to be addressed in the material and in how the core is cut and stacked.

The Full Sequence Cutting Method

Julong’s low noise cores use Baosteel B30P105-LM low magnetostriction steel, combined with what the company calls full sequence cutting: the yoke laminations, side limb laminations and centre limb laminations are all cut from the same coil of material.

The reason this matters is that magnetostriction varies slightly from coil to coil even within one grade. If different parts of a core come from different coils, those small differences put the parts marginally out of step with one another, and the resulting mismatch adds noise. Sourcing the whole core from one coil eliminates that variable. Julong reports this achieves a 3 dB reduction — which, on a logarithmic scale, is roughly half the acoustic power.

Specification

  • Material: Baosteel B30P105-LM low noise grade and other grain oriented grades
  • Method: full sequence cutting, all core parts from a single coil
  • Noise benefit: approximately 3 dB below conventional construction
  • Equipment: SDRI full sequence cutting lines, 600 and 900 series with two shears and eight punches
  • Automation: intelligent cutting and stacking cell since 2019
  • Trial model: SCB10-630/10 among Baosteel new grade trials

Applications

  • Cast resin and VPI dry-type transformers for indoor installation
  • Hospitals, data centres, airports and commercial buildings
  • High-rise and basement substations
  • Rail transit, metro and tunnel installations
  • Any project with a contractual sound pressure limit

Ordering Information

Provide the core drawing, transformer rating, the target sound level and the standard it is measured against, preferred grade and thickness, and the annual volume. If a sound level guarantee applies to your end customer, state it at enquiry stage — grade selection and cutting method are chosen to meet it. Submit the enquiry through IndusGrove.

Exclusive Baosteel partner with a joint Baosteel-Julong laboratory for ultrathin silicon steel processing. 58 slitting and cutting lines including GEORG PrecisionCut TBA800 E-Stacker, TBA1000 and TBA800. Output above 100,000 tonnes per year, around 8,000 tonnes of finished core per month. Contact via IndusGrove with grade, thickness, dimensions and annual tonnage.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.