Transformer Cores & Silicon Steel

Julong Oil-Immersed Distribution Transformer Core (Widened Yoke)

High efficiency distribution transformer cores using ultrathin 0.16, 0.18 and 0.20 mm grain oriented steel with the widened yoke technique, developed jointly with Baosteel and Wujiang Transformer since 2014.

Share This Product :

Julong Oil-Immersed Distribution Transformer Core (Widened Yoke)

Distribution transformers are installed in enormous numbers and each one runs energised around the clock for decades. Their no-load loss, multiplied across a national network, is one of the largest single sources of loss in any power system — which is why efficiency standards for distribution transformers have tightened repeatedly worldwide.

Two Techniques That Cut No-Load Loss

Ultrathin silicon steel

Eddy current loss in a lamination scales with the square of its thickness. Moving from conventional 0.27 or 0.30 mm material to 0.20, 0.18 or even 0.16 mm cuts that component substantially. The difficulty is handling: thinner steel is harder to slit without burr, harder to cut without distortion, and harder to stack without damage. That is precisely the problem the Baosteel–Julong Joint Laboratory was set up in 2015 to solve, and Julong runs twelve high-speed cutting lines configured for it.

Widened yoke

The yoke carries flux between the limbs. Widening it relative to the limb reduces flux density in the yoke, and since core loss rises steeply and non-linearly with flux density, a modest increase in yoke width buys a disproportionate reduction in loss for a small amount of extra steel. Julong has twelve cutting lines with double yoke capability to produce these profiles at volume.

The Development Partnership

Since 2014 Julong has worked with Baosteel and Wujiang Transformer on a high efficiency distribution transformer core programme, and has participated in trial production of new Baosteel grades including B20R70 and B18R065. That work fed into the industry standard for distribution transformer cores. Wujiang Transformer is also listed on IndusGrove — a rare case where a buyer can see both the core maker and the transformer builder that helped develop the technology.

Specification

  • Material: ultrathin grain oriented silicon steel, 0.16 mm to 0.20 mm, and conventional thicknesses
  • Technique: widened yoke supported on twelve double yoke capable cutting lines
  • Configuration: three-phase three-leg step-lap
  • Automation: intelligent cutting and stacking cells, upgraded from 2019 with SDRI Industry 4.0 automation
  • Trial production models: SB13-800/10, SB13-1250/10, SB13-315/10, SB14-315/10, SCB10-630/10

Ordering Information

Provide the transformer rating and design, target no-load loss class, preferred grade and thickness, core dimensions and clamping requirement, and annual volume. Where you are chasing a specific efficiency standard, state it — the grade, thickness and yoke geometry are chosen together to hit it. Submit the enquiry through IndusGrove.

Exclusive Baosteel partner with a joint Baosteel-Julong laboratory for ultrathin silicon steel processing. 58 slitting and cutting lines including GEORG PrecisionCut TBA800 E-Stacker, TBA1000 and TBA800. Output above 100,000 tonnes per year, around 8,000 tonnes of finished core per month. Contact via IndusGrove with grade, thickness, dimensions and annual tonnage.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.