Transformer Cores & Silicon Steel

Julong Pre-Stacked Transformer Core Laminations

Step-lap pre-stacked laminations in three-phase three-leg and three-phase five-leg configurations, cut and stacked on GEORG TBA800 and TBA1000 lines with automatic pre-stack modules. Supplied to Siemens Energy, ABB, Schneider, Toshiba, Hyosung and TBEA.

Share This Product :

Julong Pre-Stacked Transformer Core Laminations

A pre-stacked lamination package arrives at the transformer works already cut, sequenced and bundled in the order the core will be assembled. The transformer builder stacks packages rather than individual sheets, which removes the slowest and most error-prone step from core assembly.

Why Transformer Builders Buy Pre-Stacked Rather Than Cut In-House

  • Core assembly time collapses. Stacking a large power transformer core sheet by sheet is days of skilled labour. Handling pre-stacked packages instead is a substantial reduction.
  • Step-lap geometry is held precisely. Modern cores use a step-lap joint, where the overlap staggers across several laminations to reduce local flux crowding at the corner. Cutting accuracy at the joint is what determines whether the designed no-load loss and noise figures are actually achieved.
  • No capital tied up in cutting lines. A GEORG cutting and stacking line is a multi-million euro asset that only pays back at volume.
  • Scrap moves off the customer’s books. Slitting and cutting yield loss stays with the processor.

Equipment and Configurations

  • Configurations: three-phase three-leg and three-phase five-leg
  • Lines: GEORG PrecisionCut TBA800 C Stacker with Autostack module, TBA800 and TBA1000 with automatic pre-stack modules
  • Maximum dimensions: TBA1000 to 1040 mm wide and 5000 mm long; TBA800 to 860 mm wide and 5000 mm long
  • Also available: SDRI HJX(D23)-900 two-shear eight-punch, -600 and -400 lines

Customer Base

Julong supplies pre-stacked laminations to China Electric Equipment Group, Siemens Energy, ABB, Schneider, Toshiba, Nantong Hyosung and TBEA. That list is the useful qualification signal here — core laminations are a component the major transformer OEMs audit closely, because a core defect is not repairable once the transformer is wound and tanked.

Ordering Information

Supply the core drawing with lamination dimensions, step-lap arrangement, grade and thickness, and the stacking sequence required. State packaging and the delivery interval against your build programme. Submit the enquiry through IndusGrove.

Exclusive Baosteel partner with a joint Baosteel-Julong laboratory for ultrathin silicon steel processing. 58 slitting and cutting lines including GEORG PrecisionCut TBA800 E-Stacker, TBA1000 and TBA800. Output above 100,000 tonnes per year, around 8,000 tonnes of finished core per month. Contact via IndusGrove with grade, thickness, dimensions and annual tonnage.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.