Transformer Cores & Silicon Steel

Julong Reactor Iron Core

Gapped and ungapped iron cores for shunt, series and smoothing reactors, produced in a dedicated reactor core workshop on the same grain oriented steel and precision cutting lines as Julong transformer cores.

Share This Product :

Julong Reactor Iron Core

Julong operates a dedicated reactor core workshop alongside its power, dry type and oil immersed transformer core lines. Reactor cores share the material and much of the equipment with transformer cores, but the magnetic design problem is different enough to warrant separate handling.

Why a Reactor Core Is Not a Transformer Core

A transformer core is designed to carry as much flux as possible for as little magnetising current as possible — high permeability, no air gap. A reactor is the opposite: it exists to present a defined inductance, and that means deliberately introducing air gaps into the magnetic circuit to linearise the characteristic and prevent saturation under load.

Those gaps create their own engineering problems. Flux fringes outward at each gap and pushes into the laminations at right angles to the rolling direction, causing local eddy heating that a transformer core never sees. Gap spacers must be dimensionally exact and mechanically stable, because gap length sets the inductance and any drift changes the reactor’s rating. And the magnetic forces across each gap pulse at twice supply frequency, so clamping has to be stiff enough to keep noise and fatigue under control.

Capability

  • Types: gapped and ungapped cores for shunt, series, smoothing and filter reactors
  • Material: grain oriented silicon steel, including ultrathin grades where loss is critical
  • Cutting: the same GEORG and SDRI precision lines used for transformer cores, with burr controlled to 0.01 mm
  • Assembly: gap spacers and clamping structures produced in Julong’s own clamping system workshops
  • Maximum dimensions: laminations to 1040 mm wide and 5000 mm long

Applications

  • Shunt reactors for reactive compensation on transmission lines and cable circuits
  • Series and current limiting reactors
  • Smoothing reactors for HVDC converter stations
  • Filter and harmonic reactors on power quality equipment
  • Arc suppression coils and neutral earthing reactors

Ordering Information

Provide the reactor design with required inductance and current rating, the core drawing including gap arrangement and spacer material, grade and thickness, clamping requirement, and annual volume. State the linearity and saturation requirements, since these drive the gap design. Submit the enquiry through IndusGrove.

Exclusive Baosteel partner with a joint Baosteel-Julong laboratory for ultrathin silicon steel processing. 58 slitting and cutting lines including GEORG PrecisionCut TBA800 E-Stacker, TBA1000 and TBA800. Output above 100,000 tonnes per year, around 8,000 tonnes of finished core per month. Contact via IndusGrove with grade, thickness, dimensions and annual tonnage.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.