HIPOTs (1KV-15KV)

Megger FT6/12 Mk2 Breakdown, Leakage and Ionization Tester

  • Nondestructive testing
  • Output voltages up to 6 kV a.c. and 12 kV d.c. continuously variable
  • For safety, output current is limited and displayed on a meter (in-phase and total current)

Share This Product :

The Megger? FT6/12 Mk 2 is an a.c./d.c. breakdown, leakage, and ionization tester. The instrument supplies a continuously variable output voltage of up to 12 kV d.c. or up to 6 kV a.c. RMS each in two ranges. Provision is made for the measurement of a.c. and d.c. leakage current, the detection of ionization, and the indication of breakdown from the item under test. The total leakage current and the in-phase leakage current are indicated; a.c. capacitive current and both a.c. and d.c. leakage resistance can be calculated. Panel meters are used to show the output voltage level and the leakage current value. The instrument can be set so that the voltmeter shows the level at which the breakdown occurred. APPLICATIONS The FT6/12 Mk 2 is used for flash testing and nondestructive insulation testing of materials, electrical components, and equipment, with measurements of the breakdown voltage easily made. The source impedance of the output voltage is low enough to permit the rapid testing of high capacitance components, and at the same time automatically limiting the available output current. The facilities provided for remote control of the instrument make it very suitable for mounting permanently as part of a test equipment console. FEATURES AND BENEFITS
  • Non-destructive testing
  • Output voltages up to 6 kV a.c. and 12 kV d.c. continuously variable
  • For safety, output current is limited and displayed on a meter (in-phase and total current)
  • Audible and visible indication of breakdown, audible indication of ionization
  • Ionization is detected via a loudspeaker or through a separately connected oscilloscope
  • Fault burning facility Provision for external programming of test voltage from
  • remotely variable supply and indication of breakdown
 

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].