Power Quality Analyzers

Metrel MI 2992 Power Analyser – Class A Power Quality Analyser

Handheld three-phase Class A power quality analyser with 10.1″ touchscreen, harmonics to the 63rd, supraharmonics to 14.9 kHz, transient capture and long-term recording to IEC 61000-4-30 Class A.

Share This Product :

Metrel MI 2992 Power Analyser

The MI 2992 is a handheld, three-phase Class A power quality analyser built around a 10.1″ TFT colour touchscreen. A step-by-step setup wizard allows an engineer to begin a compliant recording without complex configuration, and the instrument supports both long-term power quality recording and short-term troubleshooting on the same platform.

Measuring functions

  • Voltage: TRMS, DC, fundamental, under/over, peak, crest factor — 4 channels
  • Current: TRMS, DC, fundamental, peak, crest factor — 4 channels
  • Connections supported: 1W, 2W (split phase), 3W, open delta, 4W, INV-3W, INV-1W
  • Power: combined, fundamental and non-fundamental, active, non-active, apparent, inductive, capacitive, consumed and generated, with load unbalance
  • Harmonics: harmonic and inter-harmonic analysis to the 63rd, THD on voltage and current, TDD, harmonic phase angle and harmonic pollution
  • Supraharmonics: 2.1 – 14.9 kHz in 200 Hz bins
  • Flicker, unbalance, K-factor and energy (active, reactive, consumed, generated)
  • Event capture: dips, swells, interruptions, RVC, inrush currents, alarms, signalling and transients

Standards

Power quality measurement complies with IEC 61000-4-30 Class A, the reference standard for contractual and dispute-grade power quality measurement.

Analysis and reporting

Trends for every recorded parameter can be reviewed directly on the instrument, including historical data. The MPVision PC software adds local or remote data transfer, automated post-processing and report generation, and remote access over VNC allows full control of the instrument from another location — useful where the analyser is left installed in an energised switchroom.

Applications

Industrial and commercial power quality investigations, harmonic surveys ahead of capacitor bank or filter design, verification of supply quality against utility contracts, load and energy studies, and fault-finding on unbalanced or distorted networks.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].