Contact Resistance

Metrel MI 3250 MicroOhm 10 A Low Resistance Ohmmeter

Portable micro-ohmmeter with test current up to 10 A, using the 4-wire Kelvin method with automatic bidirectional measurement for breaker and switch contacts, busbars, cable joints and transformer and motor windings.

Share This Product :

Metrel MI 3250 MicroOhm 10 A

The MI 3250 MicroOhm 10 A is a portable low resistance ohmmeter for measuring contact and joint resistance on circuit breakers and switches, busbars, cable joints, and small to medium transformer and motor windings, with a test current of up to 10 A.

Measurement method

The instrument uses the 4-lead Kelvin method, which removes test lead and contact resistance from the reading — essential when the quantity being measured is in the micro-ohm range and the leads themselves may contribute more resistance than the sample.

An automatic bidirectional procedure reverses the test current and averages the two readings. On any test object with a magnetic core — a transformer or motor winding in particular — thermal EMF and induced voltages will otherwise bias the result. Bidirectional averaging cancels that error, which is why it is the accepted method for winding resistance work.

Applications

  • Circuit breaker and disconnector contact resistance verification during commissioning and maintenance
  • Busbar joint and bolted connection integrity checks
  • Cable joint and termination resistance measurement
  • Transformer and motor winding resistance on small and medium units
  • Earth bond and continuity verification on industrial equipment

Why it matters

A high-resistance joint is the origin of most switchgear thermal failures. Contact resistance measured against the manufacturer’s limit — and trended over successive maintenance visits — is the cheapest predictive test available on a substation, and it is routinely specified in testing and commissioning scopes.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].