Transformer Cores & Silicon Steel

PTTX Unicore for Distribution Transformers

Unicore wound and formed cores for distribution transformers — continuously wound laminations formed to shape, giving lower no-load loss and lower noise than conventional stacked construction on small ratings.

Share This Product :

PTTX Unicore for Distribution Transformers

Unicore is a different way of building a small transformer core. Instead of stacking hundreds of individually cut flat laminations, a continuous strip is cut, folded and formed into shape, then wound into a closed loop. The result is a core with far fewer joints.

Why Fewer Joints Matters

Every joint in a stacked core is a place where flux must cross an air gap and change direction relative to the grain. Joints are where the extra loss lives, where excitation current is drawn, and where much of the audible noise originates. A wound or formed core reduces the number of these discontinuities substantially, which is why the technology has taken hold on distribution ratings where no-load loss dominates the economics.

That economic point is worth stating plainly: a distribution transformer sits energised continuously for thirty or forty years whether it is loaded or not. Its no-load loss is paid for every hour of that life. Multiplied across a national fleet of hundreds of thousands of units, this is one of the largest single loss items in any power system, which is why efficiency standards keep tightening and why loss reduction at this rating carries a real capitalised value.

Practical Advantages

  • Lower no-load loss than equivalent stacked construction, helping meet tightening efficiency classes
  • Lower noise, from fewer joint discontinuities
  • Highly automated production, giving consistency unit to unit across large volumes
  • Reduced assembly labour at the transformer works
  • Amorphous and ultrathin material compatible where the loss target demands it

Applications

  • Oil-immersed distribution transformers
  • Pole-mounted and pad-mounted units
  • Solar and wind collector transformers
  • Any distribution rating governed by a no-load loss class

Ordering Information

Provide the transformer rating and voltage, the required no-load loss class and the standard it is measured against, core window and limb dimensions, grade and thickness preference, and annual volume. Where you are chasing a specific efficiency tier, state it — core technology, grade and thickness are selected together to hit it. Submit the enquiry through IndusGrove.

Manufacturing at Wuxi (transformer cores), Zhenjiang (silicon steel slitting centre), Anqing (silicon steel mill) and Türkiye (overseas base). CNAS accredited laboratory. Lead drafter of GB/T 32288-2020 for power transformer electrical steel cores. Contact via IndusGrove with grade, thickness, core drawing and annual tonnage.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.