Protection & Relays

Relay 7VH6001-0EA10-0AA0-CC

Siemens SIPROTEC 7VH60 high-impedance differential relay for restricted earth fault and busbar protection. Second-hand unit.

Share This Product :

The Siemens 7VH60 is a high-impedance differential relay, used chiefly for restricted earth fault protection and small busbar schemes.

What high impedance means, and why it is used

In a high-impedance scheme the CTs are paralleled and connected across a stabilising resistor with a high burden. For a fault outside the zone, one CT may saturate and the currents no longer sum to zero — but the resulting spill voltage is limited by the high impedance, and the relay stays stable.

The result is a scheme that is extremely sensitive to in-zone faults and very hard to maloperate on external ones. It has been the standard restricted earth fault arrangement for decades precisely because it is simple and dependable.

Restricted earth fault

REF compares the residual current of the three phase CTs against a CT in the transformer neutral. It detects winding-to-earth faults close to the star point, where the fault current is far too small for differential or overcurrent protection to see, yet the damage to the winding is real.

Scheme requirements

  • Class PX / class X CTs with a known knee-point voltage — ordinary protection CTs are not necessarily suitable
  • A correctly calculated stabilising resistor
  • A metrosil (non-linear resistor) where in-zone fault voltages could otherwise exceed insulation limits

The relay alone is not the scheme. Confirm the CT knee-point data and the existing resistor before ordering a replacement.

Condition: second-hand unit. Send the line data, CT and VT ratios and the required communication protocol with your enquiry, and IndusGrove will confirm firmware version, condition and availability.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].