Power Quality Analyzers

SACI SAM3001 Modular Multi-Loop Network Analyser

Modular three-phase network analyser measuring up to 32 three-phase or 96 single-phase circuits from one unit, with THD, harmonics to the 31st, four-quadrant measurement and Modbus RTU.

Share This Product :

SACI SAM3001 Multi-Loop Network Analyser

The SAM3001 is a modular three-phase network analyser for monitoring electrical parameters and energy measurement in industrial and tertiary facilities. It measures voltages, currents, powers and energies in real time, and adds status supervision and alarm functions for complete control of the installation.

Multi-loop architecture

A single SAM3001 measures up to 32 three-phase circuits or 96 single-phase circuits. On a distribution board with many outgoing ways, that replaces dozens of individual meters, their wiring and their Modbus addresses with one device — which is usually the difference between a metering retrofit that is affordable and one that is not.

Measurement and analysis

  • THD on voltage and current, harmonics up to the 31st
  • Four-quadrant measurement
  • Voltage peak factor and current K-factor
  • Optional display with user-friendly interface
  • ETIM class EC004489

Technical data

  • Rated voltage: 3 × 230/400 V AC
  • Overload: 1.2 Un continuous, 2 Un for 10 s
  • Input impedance: > 1.7 MΩ per phase
  • Frequency: 45–65 Hz
  • Own consumption: < 0.1 VA per phase
  • Auxiliary voltage: 230 V ±20 % AC, < 5 VA
  • Relay output: 230 V, 1.2 A AC · isolation 5 000 V AC
  • Pulse output width: 80 ms ±20 %
  • RS-485: Modbus RTU up to 38 400 bps programmable

Why K-factor is on the list

Current K-factor quantifies the additional eddy-current heating that harmonic load current causes in a transformer. On a board feeding large numbers of switch-mode or VFD loads, a rising K-factor is the early warning that the upstream transformer is being thermally derated — long before anything trips.

Applications

Multi-tenant and multi-department sub-metering, data centre and commercial building energy management, industrial distribution board monitoring, and ISO 50001 energy accounting.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].