Line Fittings & Hardware

SeaTrust Power Line Fittings and Clamps

Suspension and strain clamps, link fittings, ball-eye and socket-clevis assemblies, U-bolts and arcing horns for medium and low voltage overhead lines. Hot dip galvanised, supplied against a full bill of quantities.

Share This Product :

SeaTrust Power Line Fittings and Clamps

Line fittings are the small metal parts that connect everything else on an overhead line — the conductor to the insulator, the insulator to the crossarm, the crossarm to the pole. They cost very little individually and there are thousands of them on any distribution feeder.

Why Fittings Cause More Trouble Than Their Cost Suggests

A distribution line is only as reliable as its weakest connection. The failure modes are unglamorous and expensive: galvanising too thin, so fittings rust through in coastal or humid air within a few years; dimensional inconsistency, so a crew in the field finds that half the ball-eyes will not mate with the sockets they were shipped with; and mechanical rating overstated, so a strain clamp lets go under ice or wind loading. On rural electrification programmes covering thousands of kilometres, a fitting problem discovered after installation is a fleet-wide recall in all but name.

Range

  • Suspension clamps — for tangent structures, in armour grip and bolted types
  • Strain and dead-end clamps — bolted, wedge and compression types
  • Link fittings — ball-eye, socket-clevis, clevis-clevis, extension links, yoke plates
  • U-bolts, eye bolts and pole hardware
  • Arcing horns and protective fittings
  • Splicing fittings — compression and mid-span joints, repair sleeves
  • Parallel groove and bimetallic connectors

Specification

  • Voltage range: low voltage through medium voltage distribution
  • Material: hot dip galvanised forged and malleable steel, aluminium alloy where required
  • Corrosion protection: hot dip galvanising to ISO 1461 or ASTM A153
  • Standards: IEC 61284, ANSI, BS and DIN equivalents, or the utility’s own specification
  • Marking: mechanical rating and manufacturer identification as required

Project Experience

SeaTrust has supplied line hardware into distribution and rural electrification programmes across Kenya, Uganda, Rwanda, Burundi, Congo DRC, South Africa, Angola, Sierra Leone, Mauritania, South Sudan, Bangladesh, Myanmar, Thailand and Albania. That geography matters — specifying fittings for a humid tropical or coastal African network is a different exercise from specifying for a temperate inland one, and galvanising thickness and material choice have to reflect it.

Ordering Information

Supply the bill of quantities with drawing references, or the line design and conductor schedule so the fittings can be selected against it. State the mechanical ratings required, the governing standard, galvanising specification, marking requirements and destination port. Submit the enquiry through IndusGrove.

Two production bases at Yueqing and Lishui, Zhejiang, with more than 1,500 staff including 370 engineers. Project experience across Kenya, Uganda, Rwanda, Burundi, Congo DRC, South Africa, Angola, Sierra Leone, Mauritania, South Sudan, Bangladesh, Myanmar, Thailand and Albania. Design and project support team available. Contact via IndusGrove with the line design, bill of quantities and destination.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].