Line Fittings & Hardware

SeaTrust Stay Assemblies, Cross Arms and Pole Line Hardware

Complete stay and guy assemblies, steel cross arms, pole bands, fasteners and stay insulators for wood, concrete and steel pole distribution construction.

Share This Product :

SeaTrust Stay Assemblies, Cross Arms and Pole Line Hardware

Pole line hardware is what turns a pole into a structure. Cross arms carry the conductors, stay assemblies resist the unbalanced pull at angles and terminations, and the fasteners hold it all together for the thirty or forty year life of the line.

The Stay Assembly Is the Part That Gets Underestimated

At every angle pole, dead-end and termination, conductor tension pulls the structure sideways. The stay — the guy wire running down to an anchor in the ground — is what stops the pole from leaning and eventually failing. It is a complete system rather than a single item: stay wire, thimble, turnbuckle or stay rod for adjustment, stay insulator to break the electrical path down the wire, anchor plate or block, and the clamps that connect them.

Two things go wrong in practice. The stay insulator is omitted or under-rated, leaving a live path to ground level if a conductor falls onto the guy wire — a genuine safety hazard on populated feeders. And the anchor is sized for the soil that was assumed rather than the soil that is actually there, so it pulls out over time and the line develops a permanent lean. Both are specification failures, not manufacturing ones, which is why supplying the complete assembly matters more than supplying parts.

Range

  • Stay and guy assemblies — stay wire, rods, thimbles, turnbuckles, anchor plates and blocks
  • Stay insulators — porcelain and composite egg insulators
  • Cross arms — hot dip galvanised steel channel and angle, single and double
  • Pole bands, brackets and D-irons
  • Fasteners — bolts, nuts, washers, spring washers, in galvanised and stainless steel
  • Pole caps, steps and accessories

Specification

  • Pole types supported: wood, spun and cast concrete, steel tubular and lattice
  • Material: hot dip galvanised steel to ISO 1461 or ASTM A153
  • Standards: IEC, ANSI, BS and DIN equivalents, or utility specification
  • Supply: loose items or complete assemblies kitted per structure type

Ordering Information

Supply the pole schedule and structure drawings, or the line design so assemblies can be selected. State pole type and dimensions, conductor and tension data, soil conditions at anchor points if known, galvanising specification and the governing standard. Kitting per structure type is worth requesting on large programmes — it removes a great deal of sorting and error in the field. Submit the enquiry through IndusGrove.

Two production bases at Yueqing and Lishui, Zhejiang, with more than 1,500 staff including 370 engineers. Project experience across Kenya, Uganda, Rwanda, Burundi, Congo DRC, South Africa, Angola, Sierra Leone, Mauritania, South Sudan, Bangladesh, Myanmar, Thailand and Albania. Design and project support team available. Contact via IndusGrove with the line design, bill of quantities and destination.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.