Composite Insulators

Wishpower Composite Line Post Insulator (10 kV – 220 kV)

Wishpower composite line post and station post insulators from 10 kV to 220 kV. Silicone rubber housing on a solid FRP core, with base flange or stud mounting for pole-top, substation post and disconnector switch applications.

Share This Product :

Wishpower Composite Line Post Insulator (10 kV – 220 kV)

Wishpower composite line post and station post insulators provide rigid, cantilever-loaded insulation for pole-top line construction, substation busbar support and disconnector switch columns. They replace porcelain post insulators with a lighter, shatter-resistant silicone rubber alternative that is easier to transport, handle and install.

Construction

A solid pultruded FRP core provides cantilever and compressive strength. An HTV silicone rubber housing is moulded onto the core in one shot, and metal end fittings — base flange, threaded stud, gain base or clamp top — are crimped and galvanised. Because the core is solid rather than hollow, the design tolerates the bending moments generated by conductor tension and wind loading on horizontal post assemblies.

Typical Specification

  • System voltage: 10 kV, 11 kV, 22 kV, 33 kV, 36 kV, 66 kV, 110 kV, 132 kV, 220 kV
  • Loading: cantilever, compression and tension ratings quoted per voltage class and core diameter
  • Housing material: HTV silicone rubber (SiR)
  • Core: solid pultruded fibreglass rod
  • Mounting: base flange, threaded stud, gain base, clamp top or tie top
  • Shed profile: standard or alternating (anti-fog) shed for high pollution service
  • Applicable standards: can be supplied against IEC 61952 and IEC 62217; ANSI C29.17 equivalents on request

Applications

  • Pole-top horizontal and vertical line post assemblies on 11 kV to 132 kV feeders
  • Substation busbar and equipment support columns
  • Support columns for outdoor disconnectors, isolators and earthing switches
  • Compact and narrow right-of-way line designs
  • Retrofit of cracked or contaminated porcelain post insulators

Selection Notes

Post insulator selection is driven by cantilever load rather than tensile load. Specify the maximum working cantilever load at the conductor attachment point, the required minimum creepage distance for the site pollution class, mounting interface and bolt circle, and the conductor clamp type. Wishpower manufactures the FRP core in-house, so core diameter and length can be adjusted to meet non-standard cantilever or height requirements. Submit your specification through IndusGrove for a direct factory quotation.

OEM/ODM available. Minimum order quantity typically 100 pieces. Incoterms FOB, CIF, CFR, EXW. Payment T/T or L/C. Typical lead time approximately 30 days ex Shanghai, Ningbo or Qingdao.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.