Composite Insulators

Wishpower Composite Pin Insulator (15 kV – 35 kV)

Wishpower composite and HDPE pin insulators for 15 kV to 35 kV overhead distribution lines. Lightweight, shatter-resistant pin-type insulation for tangent and light angle pole-top construction, with standard ANSI and IEC pin threads.

Share This Product :

Wishpower Composite Pin Insulator (15 kV – 35 kV)

Pin insulators carry the conductor on tangent and light angle structures of medium voltage overhead distribution lines. Wishpower supplies both silicone rubber composite and modified HDPE (high density polyethylene) pin insulators as direct replacements for porcelain pin types, with the same pin thread interface and conductor tie groove geometry.

Two Material Options

Silicone rubber composite pin insulator

HTV silicone rubber housing moulded onto an FRP core with a galvanised steel pin socket. Preferred where pollution severity is high — coastal salt-fog, desert dust or industrial fallout — because the hydrophobic silicone surface suppresses leakage current and dry-band arcing.

Modified HDPE pin insulator

Injection-moulded, UV-stabilised polyethylene body. Lower unit cost and extremely tough mechanically, well suited to rural electrification programmes and networks where vandalism and gunshot damage to porcelain and glass is a recurring cost.

Typical Specification

  • System voltage: 11 kV, 15 kV, 22 kV, 24 kV, 33 kV, 35 kV
  • Housing: HTV silicone rubber or modified HDPE
  • Core / spindle: FRP core with galvanised steel insert, or moulded polymer body with steel spindle
  • Top groove: top tie and side tie configurations available
  • Pin thread: standard ANSI and IEC pin and spindle threads
  • Colour: grey standard; other colours to order
  • Applicable standards: can be supplied against IEC 60383 and IEC 62217; ANSI C29.5 / C29.6 equivalents on request

Applications

  • 11 kV to 35 kV overhead distribution tangent and light angle structures
  • Rural electrification and network extension programmes
  • Replacement of failed or vandalised porcelain pin insulators
  • Coastal and heavily polluted feeders where porcelain flashover rates are high

Ordering Information

Specify system voltage, housing material preference (silicone or HDPE), tie configuration, pin thread standard and creepage requirement. Wishpower offers OEM branding and custom colours. Minimum order quantity is typically 100 pieces. Submit an enquiry through IndusGrove for factory pricing.

OEM/ODM available. Minimum order quantity typically 100 pieces. Incoterms FOB, CIF, CFR, EXW. Payment T/T or L/C. Typical lead time approximately 30 days ex Shanghai, Ningbo or Qingdao.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.