Fuse Cutouts

Wishpower Drop-Out Fuse Cutout (11 kV – 36 kV)

Wishpower expulsion type drop-out fuse cutouts for 11 kV to 36 kV overhead distribution networks. Polymer or porcelain insulator body with visible open-gap isolation, protecting distribution transformers, capacitor banks and feeder taps.

Share This Product :

Wishpower Drop-Out Fuse Cutout (11 kV – 36 kV)

The drop-out fuse cutout is the most widely deployed protective device on medium voltage overhead distribution networks. It combines a replaceable expulsion fuse link with a hinged fuse tube that drops open on operation, giving line crews an unambiguous visual indication of the faulted phase and a visible isolation gap for safe working.

How It Works

Load current passes through a fuse element inside the fuse tube. On a fault, the element melts and the resulting arc vaporises the tube’s fibre liner, generating de-ionising gas that extinguishes the arc at the first current zero. The mechanical latch releases and the tube rotates down under gravity, held only at the lower hinge. The dropped tube is visible from ground level, and the open gap satisfies isolation requirements for downstream work.

Typical Specification

  • Rated voltage: 11 kV, 12 kV, 15 kV, 24 kV, 27 kV, 33 kV, 36 kV
  • Rated continuous current: 100 A and 200 A
  • Interrupting capacity: typically 8 kA to 12 kA symmetrical, per rating
  • Insulator body: silicone rubber composite (polymer) or wet-process porcelain
  • Fuse links: type K (fast) and type T (slow) expulsion links
  • Hardware: copper alloy current-carrying parts, galvanised steel bracket, stainless steel fasteners
  • Mounting: cross arm or pole bracket, single phase or three phase gang
  • Applicable standards: can be supplied against IEC 60282-2 or ANSI C37.42

Polymer Versus Porcelain Body

Polymer bodied cutouts weigh substantially less, which speeds pole-top installation and reduces breakage in transit — a recurring cost on long-haul export shipments. They also survive gunshot and stone damage that would shatter porcelain. Porcelain remains specified by some utilities for its long field track record and surface hardness. Wishpower supplies both, with identical mounting interfaces.

Applications

  • Distribution transformer primary protection
  • Feeder tap and spur line sectionalising
  • Capacitor bank protection
  • Rural distribution and electrification schemes
  • Solar PV and small generation interconnection points

Ordering Information

Specify rated system voltage, continuous current rating, required interrupting capacity, body material (polymer or porcelain), fuse link type and rating, and mounting arrangement. Fuse links can be supplied loose alongside the cutouts. Submit an enquiry through IndusGrove for a direct factory quotation.

OEM/ODM available. Minimum order quantity typically 100 pieces. Incoterms FOB, CIF, CFR, EXW. Payment T/T or L/C. Typical lead time approximately 30 days ex Shanghai, Ningbo or Qingdao.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].