Transmission Towers & Poles

Wishpower FRP Composite Insulated Cross Arm (11 kV / 33 kV)

Wishpower pultruded FRP composite insulated cross arms for 11 kV and 33 kV overhead lines. Foam-filled fibreglass profiles that combine structural support with insulation, removing the steel cross arm and reducing pole-top flashover and outage rates.

Share This Product :

Wishpower FRP Composite Insulated Cross Arm (11 kV / 33 kV)

A composite insulated cross arm replaces the conventional galvanised steel or timber cross arm with a pultruded fibreglass (FRP) profile that is itself an insulator. The conductor attachment point is electrically isolated from the pole by the arm structure, so the insulation system no longer depends solely on the pin or post insulator. Wishpower manufactures the pultruded profiles, the insulating square rod and the finished cross arm assemblies.

Construction

Continuous glass fibre roving and mat are pultruded through a heated die with an epoxy or vinyl ester resin system, producing a profile with high longitudinal strength and stable dielectric properties. Foam-filled variants add core stiffness without weight. External surfaces are UV stabilised and, on higher pollution designs, over-moulded with a silicone rubber housing to raise creepage distance.

Typical Specification

  • System voltage: 11 kV and 33 kV (other classes to order)
  • Profile: pultruded FRP box, channel or square section; foam-filled options
  • Resin system: epoxy or vinyl ester, UV stabilised
  • Surface: gel-coated, or silicone rubber over-moulded for high pollution service
  • Fittings: galvanised steel end brackets, pole clamps and conductor attachment hardware
  • Properties: non-conductive, non-corroding, non-magnetic, low thermal conductivity

Operational Benefits

  • Fewer pole-top flashovers. The arm adds insulation in series with the pin or post insulator, raising the overall withstand level of the structure.
  • Reduced wildlife and vegetation faults. An insulated arm interrupts the phase-to-earth path that causes bird and branch contact outages — a leading cause of unplanned interruptions on rural feeders.
  • No corrosion, no galvanising maintenance. FRP does not rust in coastal or industrial atmospheres, where steel cross arms need periodic replacement.
  • Lighter handling. Typically a fraction of the weight of an equivalent steel arm, allowing manual pole-top installation.
  • Compact designs. Higher insulation per unit length permits narrower phase spacing and reduced right-of-way width.

Applications

  • 11 kV and 33 kV overhead distribution line construction and refurbishment
  • Compact line and narrow corridor designs
  • Coastal, desert and industrial areas where steel corrosion is severe
  • Feeders with high wildlife or vegetation contact outage rates
  • Line uprating where additional insulation is required without full rebuild

Ordering Information

Specify system voltage, arm length and profile, required cantilever load, pole diameter and clamp interface, conductor size and attachment method, and whether silicone over-moulding is needed for the site pollution class. Submit your specification through IndusGrove for a direct factory quotation from Wishpower.

OEM/ODM available. Minimum order quantity typically 100 pieces. Incoterms FOB, CIF, CFR, EXW. Payment T/T or L/C. Typical lead time approximately 30 days ex Shanghai, Ningbo or Qingdao.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.