Surge Arresters

Wishpower Polymer Housed Metal Oxide Surge Arrester

Wishpower polymer housed metal oxide surge arresters (MOA) for distribution, station and high voltage service. Gapless zinc oxide varistor stacks in a silicone rubber housing with pressure relief, protecting transformers, switchgear and overhead lines against lightning and switching overvoltages.

Share This Product :

Wishpower Polymer Housed Metal Oxide Surge Arrester (MOA)

Metal oxide surge arresters limit the overvoltage that reaches transformers, switchgear, cable terminations and line insulation during lightning strikes and switching events. Wishpower manufactures gapless zinc oxide (ZnO) arresters in a polymer — silicone rubber — housing, in distribution, station and high voltage classes, together with the FRP core rod used in their construction.

Construction and Operating Principle

The active element is a stack of zinc oxide varistor discs with a strongly non-linear voltage–current characteristic. At normal system voltage the stack conducts only a small leakage current in the milliampere range. When an overvoltage arrives, resistance collapses and the arrester diverts the surge to earth, clamping the residual voltage to a level the protected equipment can withstand. Because the design is gapless, response is immediate and there is no follow current to interrupt.

The varistor stack is enclosed in an FRP-reinforced module and overmoulded with HTV silicone rubber. Compared with porcelain housed arresters, the polymer design is lighter, cannot shatter, and fails safely — internal pressure relief vents rather than fragmenting the housing.

Typical Specification

  • Classes: distribution, station and high voltage arresters
  • Rated voltage (Ur): typically 3 kV to 220 kV, matched to system voltage and earthing arrangement
  • Nominal discharge current (In): 5 kA and 10 kA classes
  • Housing: HTV silicone rubber, hydrophobic, pollution and UV resistant
  • Active element: gapless zinc oxide varistor stack
  • Pressure relief: fitted, with defined short-circuit withstand rating
  • Mounting: line, bracket, cross arm or substation base mounting; disconnector and surge counter optional
  • Applicable standard: can be supplied against IEC 60099-4; IEEE C62.11 equivalents on request

Applications

  • Distribution transformer HV and LV terminal protection
  • Pole-mounted and pad-mounted substation protection
  • Overhead line to underground cable transition points
  • Switchgear, ring main unit and recloser protection
  • Solar PV, wind and BESS plant collector system protection

Selection Notes

Correct arrester selection requires the system nominal voltage, the system earthing arrangement (solidly earthed, resistance earthed or isolated neutral), the maximum continuous operating voltage (MCOV/Uc), the temporary overvoltage profile, the required nominal discharge current class and the pollution severity level. An arrester rated too low will fail thermally; rated too high, it will not adequately protect the equipment. Provide these parameters with your enquiry through IndusGrove and Wishpower will confirm the correct rating and quote.

OEM/ODM available. Minimum order quantity typically 100 pieces. Incoterms FOB, CIF, CFR, EXW. Payment T/T or L/C. Typical lead time approximately 30 days ex Shanghai, Ningbo or Qingdao.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.